Specify system information using managed objects in MIB-II, the standard MIB defined in RFC 1213.

Specify the management systems to which the appliance sends traps, as described in Adding Trap Receivers.

Enable the appliance to accept queries, as described in Accepting Queries.

To configure SNMPv1 and SNMPv2 on the appliance, do the following: You can also override the Master Grid settings at a member level. You can set up either SNMPv1/SNMPv2 or SNMPv3, or all of them for the Master Grid. The appliance supports SNMPv1, SNMPv2, and SNMPv3.

When you use SNMPv3 for polling a device and receiving traps from it, confirm that the same authentication type (auth, noauth, or priv) is configured for both polling and traps.You can configure the appliance to receive SNMP queries from specific management systems and send SNMP traps to specific trap receivers.

Make sure the UDP port 162 is open for IPv4 and IPv6.

For more information about proper configuration, refer to the documentation supplied by the vendor of your devices.

Configure devices to send SNMP traps to the IP address assigned to the SolarWinds platform server.

In the Trap Viewer, you can configure trap‑specific alerts, to view, filter, and search for traps. You can view SNMP traps either in the SolarWinds platform Web Console or in the Trap Viewer application.

Higher capacity can only be achieved with significant hardware improvements over minimum SolarWinds requirements.

The SolarWinds Trap Service can receive and process SNMP traps from any type of monitored network device, and can handle large numbers of simultaneously incoming traps.Ī SolarWinds installation can process approximately 500 traps per second. SNMP traps are received by the SolarWinds Trap Service, which listens for incoming trap messages on UDP port 162, and then decodes, displays, and stores the messages in the SolarWinds platform database.īy default, SNMP traps are stored in the Traps and TrapVarBinds tables in the SolarWinds platform database. View logs and events with the Orion Log Viewer.Items to consider before installing Log Analyzer or Orion Log Viewer.

Starting with Orion Platform 2019.4, you can optionally manage Syslog and SNMP trap messages through the SolarWinds platform Web Console using the free Orion Log Viewer (OLV).

How to setup snmp trap receiver